3 - ENG
D24072
SAFETY GUIDELINES - DEFINITIONS
Indicates an imminently hazardous
situation which, if not avoided, will
result in
death or serious injury.
Indicates a potentially hazardous
situation which, if not avoided,
could
result in
death or serious injury.
Indicates a potentially hazardous
situation which, if not avoided,
may
result in
minor or moderate injury.
Used without the safety alert
symbol indicates a potentially
hazardous situation which, if not avoided,
may
result in
property damage
.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY
AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT.
RISK OF EXPLOSION OR FIRE
ALWAYS
OPERATE THE COMPRESSOR IN A
WELL
VENTILATED
AREA FREE OF COMBUSTIBLE
MATERIALS, GASOLINE OR SOLVENT VAPORS.
IF SPRAYING FLAMMABLE MATERIALS,
LOCATE
COMPRESSOR AT LEAST 20 FEET AWAY FROM SPRAY
AREA.
AN ADDITIONAL LENGTH OF HOSE MAY BE
REQUIRED.
STORE FLAMMABLE MATERIALS IN A SECURE
LOCATION AWAY FROM COMPRESSOR.
NEVER PLACE OBJECTS AGAINST OR ON TOP OF
COMPRESSOR. OPERATE COMPRESSOR
IN AN OPEN
AREA
AT LEAST 12 INCHES AWAY FROM
ANY WALL
OR
OBSTRUCTION
THAT WOULD RESTRICT THE FLOW
OF FRESH AIR TO THE VENTILATION OPENINGS.
OPERATE COMPRESSOR IN A CLEAN, DRY, WELL
VENTILATED AREA.
DO NOT OPERATE UNIT INDOORS
OR IN ANY CONFINED AREA.
ALWAYS REMAIN IN ATTENDANCE WITH THE
PRODUCT WHEN IT IS OPERATING.
ALWAYS DISCONNECT ELECTRICAL POWER BY
MOVING PRESSURE SWITCH LEVER TO THE OFF
POSITION AND DRAIN TANK DAILY OR AFTER EACH
USE.
IT IS NORMAL FOR ELECTRICAL CONTACTS
WITHIN
THE MOTOR AND PRESSURE SWITCH
TO SPARK.
IF
ELECTRICAL
SPARKS
FROM COMPRESSOR
COME
INTO CONTACT WITH FLAMMABLE VAPORS, THEY
MAY IGNITE, CAUSING FIRE OR EXPLOSION.
RESTRICTING
ANY OF THE
COMPRESSOR
VENTILATION OPENINGS
WILL CAUSE SERIOUS
OVERHEATING AND
COULD CAUSE FIRE.
UNATTENDED OPERATION
OF THIS PRODUCT
COULD
RESULT IN PERSONAL INJURY OR PROPERTY
DAMAGE. TO REDUCE THE RISK OF FIRE, DO NOT
ALLOW THE COMPRESSOR TO OPERATE
UNATTENDED.
WHAT CAN HAPPEN
HOW TO PREVENT IT
SAFETY and PREVENTING EQUIPMENT PROBLEMS.
To help you recognize this information, we use the symbols
below. Please read the manual and pay attention to these sections.
Summary of Contents for 919.167460
Page 34: ...34 SP D24072 ...
Page 35: ...35 SP D24072 ...