6 — Eng
D20410
Model No.
Max. Developed HP
Displacement CFM at Max. Pressure
Bore
Stroke
Voltage - Single Phase
Minimum Branch Circuit Requirement
*Fuse Type
Amperage at Max. Pressure
Air Tank Capacity - Gallons
Approximate Cut-in Pressure
Approximate Cut-out Pressure
SCFM @
90 psig
SCFM @
40 psig
UL Listed
919.184160
6.5
15
2 7/8
2"
220
20 amp
Fusetron Type "T"
15
60 gal ASME
100
125
10.5
13.0
Yes
*A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch
circuit the air compressor is operated on.
CFM:
Cubic feet per minute.
SCFM:
Standard cubic feet per minute; a unit of measure
of air delivery.
PSIG:
Pounds per square inch gauge; a unit of measure
of pressure.
ASME:
American Society of Mechanical Engineers; made,
tested, inspected and registered to meet the standards
of the ASME.
UL Listed:
Underwriters Laboratories; samples of com-
pressor outfits taken from production were submitted to
UL and found to comply with their requirements for
design and performance.
Cut-Out Pressure:
When you turn on your air compres-
sor and it begins to run, air pressure in the air tank begins
to build. It builds to a certain high pressure before the
motor automatically shuts off - protecting your air tank
from pressure higher than its capacity. The high pressure
at which the motor shuts off is called "cut-out pressure."
Cut-In Pressure:
While the motor is off, air tank pressure
drops as you continue to use your accessory. When the
tank pressure drops to a certain low level the motor will
re-start automatically. The low pressure at which the
motor automatically re-starts is called "cut-in pressure."
To Lock-Out Power:
Place a lock on the line power
switch so no one else can turn on the power.
The following accessories are available through the current Power and Hand Tool Catalog or full-line Sears stores.
• SPRAY GUNS
• BLOW GUNS
• AIR CAULKING GUNS
• AIR POWERED WASHER GUNS
• SAND BLASTERS
• AIR BRUSHES
• IN LINE FILTERS
• TIRE AIR CHUCKS
• PAINT TANKS
• AIR TANKS
• INFLATOR KITS
• QUICK CONNECTOR SETS
(various sizes)
• AIR PRESSURE REGULATORS
• OIL FOG LUBRICATORS
• AIR TOOLS
Sanders
Drills
Impact Wrenches
Hammers
• AIR HOSE:
1/4", 3/8" OR 1/2" I.D.
in various lengths
SPECIFICATION CHART
GLOSSARY
ACCESSORIES FOR USE WITH SEAR AIR COMPRESSORS
