background image

22

CRAFTSMAN 

ROT

ARY LA

WN MOWER - - MODEL NUMBER  

944.101781

REPAIR PARTS

84

96

6

59

13

1

3

7

8

56

74

75

76

77

78

71

73

72

80

20

58

83

85

59

11

11

26

26

59

4

9

21

22

24

28

28

32

33

34

36

53

39

40

41

41

41

42

43

44

45

46

47

48

49

50

51

52

53

53

55

57

57

22

28

34

53

62

64

57

28

17

12

12

2

5

63

84

96

38

6

25

27

31

35

25

27

31

68

18

10

19

11

  CAUTION

:  Alcohol blended fuels 

(called gasohol or using ethanol or meth-

anol) can attract moisture which leads to 

separation and for ma tion of acids during 

storage.  Acidic gas can damage the fuel 

system of an engine while in storage.  To 

avoid engine problems, the fuel system 

should be emptied before stor age of 30 

days or longer.  Empty the gas tank, start 

the engine and let it run until the fuel lines 

and carburetor are empty.  Use fresh fuel 

next season.  See Storage In struc tions for 

additional information.  Never use engine 

or carburetor cleaner products in the fuel 

tank or permanent damage may occur.

Grass 

catcher 

frame 

handle

Bag 

handle

TO EMPTY GRASS CATCHER 

1.  Lift up on grass catcher using the 

frame han dle.

2.  Remove grass catcher with clippings 

from under lawn mower han dle.

3.  Empty clippings from bag using both 

frame handle and bag handle.

NOTE

:  Do not drag the bag when empty-

ing;  it will cause unnecessary wear.

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in 

the engine. For type and grade of oil to 

use, see “EN GINE” in the Maintenance 

section of this manual.

  CAUTION:

 DO NOT overfill engine with 

oil, or it will smoke heavily from the muffler 

on startup.

1.  Be sure lawnmower is level.  

2.  Remove oil dipstick from oil fill spout.

3.  You receive a container of oil with the 

unit.  Slowly pour the entire container 

down the oil fill spout into the engine.

NOTE: 

Initial oil fill requires only 18 oz. 

due to residual oil in engine from the 

manufacturers 100% quality testing. When 

changing oil you may need 20 oz.

4.  Insert and tighten dipstick.

IMPORTANT:

•  Check oil level before each use.  Add 

oil if needed.  Fill to full line on dipstick.

ADD GASOLINE

•  Fill fuel tank to bottom of tank filler 

neck.  Do not overfill.  Use fresh, clean, 

regular unleaded gasoline with a mini-

mum of 87 octane.  Do not mix oil with 

gasoline.  Purchase fuel in quan ti ties 

that can be used within 30 days to as-

sure fuel freshness.

  CAUTION:  

Wipe off any spilled oil or 

fuel.  Do not store, spill or use gasoline 

near an open flame.

TO STOP ENGINE

•  To stop engine, release operator pres-

ence control bar.

TO START ENGINE

NOTE:

 Due to protective coatings on the 

engine, a small amount of smoke may be 

present during the initial use of the prod-

uct and should be considered normal. 

NOTE:

  Your engine is equipped with an 

automatic choke system.  No priming or 

choking is required before starting.

•  Remove red starter button from the ac-

cessory bag and insert it into the starter 

housing attached to the upper handle.

•  Hold operator presence control bar 

down to the han dle and push the start 

button.

IMPORTANT

:  Do not crank engine more 

than five continous seconds between 

each time you try to start. Wait 5 to 10 

seconds between each attempt.

Engine 

oil cap

Gasoline filler 

cap 

Summary of Contents for 944.101781

















Reviews: