26
BRIGGS & STRATTON 4-CYCLE ENGINE
24
26
718
27
1
3
25
28
46
16
20
12
4
1264
505
616
562
615
227
1263
22
404
718
22A
741
32
29
27
43
524
847
523
842
598
48
1330
1329
1058
1036
850
455
332
668
78
37
23
1005
305
60
58
608
836
832
300
613
MODEL NUMBER 104M05-0093-F1
7
TO INSTALL ATTACHMENTS
Your lawn mower was shipped ready to
be used as a mulcher. To convert mower
to bagging or discharging, see “TO CON-
VERT MOWER” in the Operation section
of this manual.
TO PREPARE BATTERY
NOTE:
Your battery must be charged
before you can start your lawn mower.
1. Open port on electric start housing.
2. Con
nect battery charger con nec tor
(male) to bat tery con nec tor (fe male).
3. Plug battery charger into 110 volt A.C.
outlet.
• Leave battery charger connected for
24 hours before starting your engine
for the first time.
Connect your battery charger to charge
battery as re quired.
IMPORTANT:
The engine will not re-
charge your battery.
At the end of the mowing season the
battery should be charged for 48 hours to
protect the battery during winter storage.
Electric
start
housing
Battery
charger
INSTALL STARTER ROPE
1. Loosen T-knob.
2. Hold control bar against upper handle.
3. Slowly pull engine starter rope out until
rope will slip into loop of rope guide.
4. Tighten T-knob.
Upper handle
Control bar
Engine
starter rope
Rope guide
T-Knob
