13
OPERATION
STOP THE SNOWTHROWER
1. Release the auger control lever (
B
, Figure 2).
2. Release the traction control lever (
C
).
3. Pull out the safety key (
D
, Figure 3).
4. Keep the safety key out of the reach of children.
WARNING: Read Operator’s Manual before operating
machine. This machine can be dangerous if used
carelessly.
• Never operate the snowthrower without all guards,covers,
shields in place.
• Never direct discharge towards windows or allow
bystanders near machine while engine is running.
• Stop the engine whenever leaving the operating
position.
• Disconnect spark plug before unclogging the impeller
housing or the discharge chute and before making
repairs or adjustments.
• When leaving the machine, remove the safety key. To
reduce the risk of fire, keep the machine clean and free
from spilled gas, oil, and debris.
WARNING: Never run engine indoors or in an enclosed,
poor ventilated area. Engine exhaust contains CARBON
MONOXIDE, an ODORLESS and DEADLY GAS.
• Keep hands, feet, hair, and loose clothing away from
any moving parts on engine and snowthrower.
• Temperature of muffler and nearby areas can exceed
150°F (66°C). Avoid these areas.
• DO NOT allow children or young teenagers to operate or
be near snowthrower while it is operating.
EASY-TURN
TM
TRACTION CONTROL
For easy turning when using the snowthrower, squeeze the Easy-
Turn™ lever.
Engaging the Easy-Turn™ lever releases the left or right traction
wheel, but allows the opposite wheel to continue driving. Figure 4
shows the left Easy-Turn lever engaged.
Releasing the Easy-Turn™ lever automatically engages both drive
wheels for full traction (see Figure 5).
NOTE: The Easy-Turn
TM
will be more difficult to activate
under a heavy load. Activate the lever before beginning a
turn.
Figure 4
Figure 5
1
2
1
2
