2
Assemble Handle
1.
Loosen upper fasteners (
A
).
2.
Remove lower fasteners (
B
).
3.
Carefully lift handle to the operating position while guiding
the speed control rod over the tire (
C
).
1/2”
A
A
B
B
C
4.
Make sure cable ends are secured in holes of control
levers (
D
).
5.
Make sure cables are not caught between the upper and
lower handle (
E
).
D
E
6.
Reinstall lower fasteners (
B
). Tighten upper and lower
fasteners (
A
and
B
) securely.
7.
Use the supplied ties to secure the EZ Turn cable (if
equipped) to the left handle.
1/2”
A
A
B
B
Assemble Speed Select Lever
1/2 7/16
G
G
F
F
J
H
Type 1
Type 2
1. Type 1:
Lift up on spring-loaded sleeve (
H
), attach speed
control rod (
F
) to shift yoke (
G
), and secure by releasing
sleeve.
Type
2:
Attach speed control rod (
F
) to shift yoke (
G
) and
secure with lock washer and nut (
J
).
