English
4
Three Year Limited Warranty
CRAFTSMAN will repair or replace, without charge, any
defects due to faulty materials or workmanship for three
years from the date of purchase. This warranty does not
cover part failure due to normal wear or tool abuse. For
further detail of warranty coverage and warranty repair
information, visit
www.craftsman.com
or call
1-888-331-4569
. This warranty does not apply to
accessories or damage caused where repairs have been
made or attempted by others. THIS LIMITED WARRANTY
IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL
OR CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
Shut-off Maintenance
If shut-off clogs, remove the shut-off assembly and check
for any obstructions at the dip tube or filter. If none present,
disassemble the shut-off assembly. Clean the openings
of any obstructions and re-assemble tightly securing all
sections.
TROUBLESHOOTING GUIDE
BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website at
www.craftsman.com
for a list of service centers, or call CRAFTSMAN
at 1-888-331-4569
PROBLEM
CAUSE
CORRECTION
Sprayer starts to spray when pumping
or sprayer will not stop spraying when
shut-off handle is released.
Shut-off lock is engaged.
Squeeze shut-off handle and disengage the lock.
Sprayer leaks at pump or sprayer does
not build pressure.
1. Dirt or debris on pump gasket or closure.
2. Chipped, torn, swollen or defective pump
gasket.
3. Check valve at bottom of pump assembly.
4. Inspect o-ring on piston.
5. Loose hose.
1. Clean dirt or debris from gasket or closure.
2. Remove old gasket and replace with new.
3. Replace if missing or damaged.
4. Lubricate the pump as described in Regular
Maintenance section.
5. Re-insert hose barb, then tighten hose nut.
Sprayer material overflows through
pump barrel or pump handle rises
when handle is unlocked.
1. Dirt or debris under check valve on pump.
2. Chipped, torn or swollen pump check
valve.
1. Clean check valve and valve sealing surface on pump.
2. Replace check valve.
Hose leaks at tank.
1. Loose hose.
2. Cracked, swollen or faulty hose.
1. Re-insert hose barb, then tighten hose nut.
2. Replace shut-off assembly.
Hose leaks at shut-off.
Swollen, slit or faulty hose
Replace shut-off assembly.
Sprayer is difficult to pump.
1. Damaged piston o-ring.
2. Piston o-ring is dry.
1. Replace piston o-ring.
2. Lubricate the pump as described in Regular
Maintenance section.
Nozzle drips when shut-off handle is
released.
Dirt or debris in shut-off valve.
1. Replace shut-off assembly.
2. See Shut-off Maintenance section.
Sprayer tank leaks.
Evidence of spray material escaping from
the tank.
Replace entire sprayer.
Nozzle tip leaks, poor spray pattern,
partial spray or complete stoppage.
1. O-ring is missing or damaged.
2. Spray wand or nozzle clogged.
3. Dip tube filter clogged.
1. Replace o-ring at extension tip.
2. If applicable to sprayer model, remove and clean the
wand and nozzle.
3. If applicable to sprayer model, remove and clean the
dip tube filter.
o-ring
filter
