1. Push down on the spindle lock and
turn it counterclockwise until it starts
to slide up onto the hex portion of the
spindle. Rotate the cutting disc back
and forth until the spindle lock fully
engages on the hex portion of the
spindle.
2. Push up on the safety lever while
pressing down on the trigger to
start the tool .
9
ENGLISH
7
8
1
6
2
OPERATING
F
R
1. This tool has a Forward/Reverse
Knob that allows the cutting disc
to spin in forward or reverse direction.
Turn the knob to select the desired
direction.
7
8
1
11
11
REPLACING CUTTING DISC
2
6
