WARNING:
Make sure the hex key
bolt and the hex nut holding
the cutting disc in place are tight
before using.
8
ENGLISH
3. Place 2 – 3 drops of air tool oil (not
included) into the opening of the male
air plug before each use.
4. Make sure spindle lock is in the
unlocked position before operating.
Push down on spindle lock and
turn clockwise to unlock the spindle
lock. Cutting disc should spin
freely.
5. Connect air supply hose to the male
plug. Set the working pressure at 90 PSI
for best tool performance.
2
2
5
4
6
6
2
4
5
6
NOTICE:
Working pressure refers to the air
line pressure set to tool when tool is under
working conditions.
