background image

Page 4

CONGRATULATIONS AND THANK YOU FOR BUYING
THIS CRAFTSMAN SANDER. 

It has been designed,

engineered and manufactured to provide you with Sears high
standard of dependability, ease of operation, and operator
safety. Properly cared for, it will give you years of rugged,
trouble-free performance.

CAUTION:

Carefully read through this entire owner's manual before
using your new sander. Pay close attention to the Rules
For Safe Operation, Warnings and Cautions. If you use
your sander properly and only for what it is intended, you
will enjoy years of safe, reliable service.

Your sander has many features for making sanding
operations more pleasant and enjoyable. Safety,
performance and dependability have been given top priority
in the design of this sander making it easy to maintain and
operate.

INTRODUCTION

  SPECIFICATIONS:

Sanding Disc Diameter

5 In.

No Load Speed

14,000 opm

Diameter of Orbit

5/32 In.

Rating

120 volts, 60 Hz, AC only, 3.0 AMPS

Net Weight

3.5 Lbs.

TABLE OF CONTENTS

1.

Rules for Safe Operation ............................................................................ 2-3

2.

Introduction and Product Specifications ......................................................... 4

3.

Warranty and Table Of Contents .................................................................... 4

4.

Operation .................................................................................................... 5-8

5.

Maintenance .................................................................................................. 9

6.

Exploded View and Repair Parts List .......................................................10-11

7.

Parts/Ordering Service................................................................................. 12

FULL ONE YEAR WARRANTY ON CRAFTSMAN INDUSTRIAL RANDOM ORBIT SANDER

If this Craftsman Industrial Random Orbit Sander fails due to a defect in material or workmanship within one year from
the date of purchase, Sears will repair it free of charge.

WARRANTY SERVICE IS AVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE
IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

SEARS, ROEBUCK AND CO.
DEPT. 817 WA
HOFFMAN ESTATES,  IL   60179

Summary of Contents for sears 315.277170













Reviews: