background image

10

SPECIFICATIONS

 Engine Type ........................................................................................................................................................................................................   Air-Cooled, 2-Cycle
Displacement ............................................................................................................................................................................................................................  25 cc
Operating RPM ................................................................................................................................................................................................................... 6,500 rpm
Idle Speed RPM ...................................................................................................................................................................................................   3,200 – 4,400 rpm
Spark Plug Gap .................................................................................................................................................................................................  0.025 in. (0.635 mm)
Lubrication ...............................................................................................................................................................................................................  Fuel Oil/ Mixture
Fuel/ Oil Ratio .............................................................................................................................................................................................................................  40:1
Fuel Tank Capacity ...................................................................................................................................................................................................  10 fl .oz. (296 ml)
Approximate Unit Weight  (No fuel) ................................................................................................................................................................. 10 - 11 lbs. (4.5 - 5 kg)
 Cutting Path Diameter .............................................................................................................................................................................................. 16 in. (40.64 cm)
 Trimming Line Diameter ........................................................................................................................................................................................0.095 in. (2.41 mm)

UNIT*

 * All 

specifi cations are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without 

notice.

 REPAIR PROTECTION AGREEMENTS

Congratulations on making a smart purchase.

 Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all 

products, it may require repair from time to time. That’s when having a Repair Protection Agreement can save you money and aggravation.

Here is what the Repair Protection Plan Agreement includes:



Expert service

 by our 10,000 professional repair specialists



Unlimited service and no charge

 for parts and labor on all covered repairs



Product replacement

 up to $1500 if your covered product can not be fi xed



Discount of 10%

 from regular price of service and related installed parts not covered by the agreement; also, 10% off regular price of 

 preventive maintenance checks



Fast help by phone –

 we call it 

Rapid Resolution

 - phone support from a Sears representative. Think of us as a “talking owner’s 

manual.”

Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service 
appointment online.
The Repair Protection Agreement is a risk-free purchase. If you cancel for any reason during the product warranty period, we will provide a full refund. Or a 
prorated refund anytime after the product warranty period expires. Purchase you Repair Protection Agreement today!

Some limitations and exclusions apply. For prices and additional information in the U.S.A. call 1-800-827-6655.

*Coverage in Canada varies on some items. For full details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. or Canada call 

1-800-4-MY-HOME®

.

Summary of Contents for WEEDWACKER INCREDI.PULL 316.791020

























Reviews: