5
CraftBot 3
1.4. UNPACKING THE PRINTER
1. Place the CraftBot cardboard box on an even surface with open space around.
2. Open the box with care, avoid damaging the contents when using any cutter tools.
3. Remove the protective cardboard cover. You will find the Quick Start Guide at the top of the inner
packaging.
4. The accessories (including a USB pen drive with copy of the CraftBot user manual) are placed in the
upper foam tray. We suggest keeping the accessories in a secure place, avoid losing them.
5. The CraftBot 3D printer is under the upper foam tray enclosed in a protective plastic bag supported
with side foams to avoid any damage while shipping.
6. First remove the side foams then open the plastic bag.
7. Firmly grasp the frame of the CraftBot under the LCD screen and the handle at the back of the
printer. Make sure not to touch the extruder or the electronic panel inside the device!
8. Consider its weight. Request physical help if needed. Lift the printer from inside the plastic cover
and remove it from the cardboard packaging.
9. Place the CraftBot 3D printer on a stable and even surface with sufficient space around.
10. Remove the cardboard panel fixing the two heads inside the printer.
1.5. CONTENTS OF THE BOX
It’s time to unpack additional parts. Below you can see the contents of the box. First of all, check the
list to make sure nothing is missing!
1.
Filament encoder (2x)
2.
Filament guide tube (2x)
3.
Filament spool holder (2x)
4.
Hex wrenches (5x)
5.
USB Flash storage
6.
USB A-B cable
7.
AC power cable
8.
2x Nozzle kit boxes which
includes assortment of Nozzle
tips, Spacer cards, and a nozzle
spanners/Wrench
You should also get 2 spools of 0.75kg PLA filament, along with an assortment of colours to get you
started along with the box containing your CraftBot.
6
2
4
7
3
5
1
3
4
6
10
8
Summary of Contents for CraftBot 3
Page 1: ......