General Operation:
1. Connect the supplied AC power cord to the unit and AC wall outlet (or fully recharge the built-in battery)
as previous procedures.
2. Press the Power Switch on the rear of unit to POWER ON position to power on the unit. The POWER
Indicator on the front of unit will illuminate.
3. Press the MODE -- LED ON/OFF Button on the front of unit repeatedly to select the input source as:
● Blue Indicator illuminate (or blinking): BT (Blue Tooth) mode
● Green Indicator illuminate: Radio FM mode
● Red Indicator illuminate: AUX 1 mode
● Indigo Indicator illuminate: AUX 2 mode
4. Turn the MASTER VOLUME to adjust the volume level as desire.
5. Slide the band switches of the 4 BAND EQUALIZER to enhance or reduce the level of the specific
audio frequency as desire.
6. Press and hold the MODE—LED ON/OFF Button to turn off the decorative lights. Press and hold
the button again to turn it back.
7. When finished listening, press the Power Switch on the rear of unit to POWER OFF position to
shut of the unit.
NOTE
: If long period of time will not use the unit. Unplug the AC power cord from wall outlet.
BT (Blue Tooth):
In first time use or re-pairing to a new BT Device, pairing it as below:
1. Power on the unit as previous procedures.
2. Press the MODE--LED ON/OFF Button on the unit repeatedly until the color of the Indicator is
changed to Blue and blinking.
3. Power on the external BT Device and enter to searching mode. Start pairing as the on screen
instructions on the external BT Device. After paired, the Blue Indicator will stop blinking. (For details
pairing procedures, please refer to the user’s manual of your BT Device.).
Notes
:
● When the external BT player searched the unit, our model number “CHT825” will appear on the
display of external BT Device.
● Pairing code “0000” or “1234” may need to enter.
Normal operation after paired:
1. Turn on the BT function of the external BT Device.
2. Power on the unit, press the MODE--LED ON/OFF Button on the front of unit repeatedly until the
color of the Indicator changed to Blue and blinking.
3. Wait a few seconds until the unit paired to the external BT Device automatically. (The Blue Indicator
will stop blinking).
4. Plays the music in the connected BT Device as usual.
5. During playback:
● Press Button to pause; press and release again to resume normal playback.
● Press the or Button to skip tracks.
FM (Radio):
1. Power on the unit as previous procedures.
2. Press the MODE--LED ON/OFF Button on the unit repeatedly until the color of the Indicator is
changed to Green.
3. In first time use (or replaced the unit in a new location), press and hold the Button to search and
stored the available FM station.
4. Press the or Button repeatedly to select and plays the desired stored FM station.
5
OPERATIONS:
