6
FIRST USE:
Battery Recharge
The device has 2 (Two) built-in DC
3.7V,2500mAh
rechargeable Lithium-ion Polymer
battery. Recharge as follows:
z
Insert the small plug from the supplied AC/DC Adaptor to the DC IN jack on the
device. Plug the AC/DC Adaptor to wall outlet having AC 100-240V~, 50/60 Hz.
z
During charging, the charging indicator will turn on. When finished, it will turn off.
This power unit is intended to be in a vertical or floor mount position.
Notes: Your battery will last longer if you follow these simple guidelines for caring for and
storing it.
A. Using the supplied AC/DC Adaptor for charging only. Other models charger may damage
the device.
B. For charging first time, charge it approximate 10 hours. For normal charging, it needs
approximately 4 hours.
C. Recharge and store the device within the temperature range of 5°C~35°C (40°F~95°F).
D. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until
battery goes empty will damage battery. Battery life will be extended if you keep the
battery fully charge.
E. Battery life naturally shortens slowly over time.
F. The rechargeable battery incorporated in this product is not user replaceable.
Using the touch screen
z
Touch the corresponding button on the touch screen with your finger.
z
Touch the screen and slide from Right to Left; Left to Right to scroll the pages.
Notes:
A. Do not use force when touching the touch screen, as it may damage the screen.
B. To avoid damaging the touch screen, do not use any object other than your fingers.
C. Do not touch on the touch screen if your fingers are not clean.
D. Do not touch on the touch screen with gloves on.
E. The touch screen may not function if you use a fingernail or other instruments .
Micro SD card
This device supports Micro SD Memory Card (Card not included) to increase memory size;
insert a Micro SD card into the card slot on the side of unit.
Notes:
A. Insert the card (Up to 32GB, not included) into the card slot in the direction shown in the
rear of unit.
B. To take out the card, press the card until a “Click” is heard then pull out the card.
C. Before replacing the storage card, make sure the unit has been powered off.
D. When inserting the storage card, make sure the direction you selected is correct. Never
insert violently to avoid damaging the card or the unit. If it doesn’t work, please check if
the direction is correct.
E. When the card is used for the first time, or it has been used in other device, please format
it first through the Computer. You also need to download the desired music, photos and
movie into the card before installing into the unit.
