4
PREPARATIONS:
Recharging the built-in battery in the unit.
The unit has a built-in DC 3.7V Li-ion rechargeable battery, recharge it before first time
use or when it is consumed as follow:
1.
Connected the small plug from the supplied USB Charging Cable to the battery on
the unit.
2.
Connected the full size USB Plug from the supplied USB Charging Cable to any
Computer or USB Charger having DC 5V output as the figure below:
3.
During charging, the Charging Indicator in the full size USB Plug of the supplied USB
Charging Cable will illuminate . When finished charging, it will turned off .
Notes:
Your battery will last longer if you follow these simple guidelines for charging for
and storing.
A.
For normal charging, it need approx. 50 minutes.
B.
Recharge and store the device within the temperature range of 5°C~35°C
(40°F~95°F).
C.
Do not overcharge (longer than 24 hours). Excessive charging or discharging may
shorten the battery’s life.
D.
Battery life naturally shortens slowly over time.
Connect to any Computer or
USB Charger
(Computer and USB Charger
not included)
Summary of Contents for CRT706
Page 1: ...INTERCEPTOR Capture incredible aerial photos and videos ...
Page 11: ......