BATTERY INSTALLATION:
Main Unit:
1.
Open the Camera Module/Battery Door by slide it out then lift up as Fig 1 below.
2.
Connect the Connection Plug from the Battery to the Battery Connection Jack from the unit as
the Fig 2 below.
3.
Install the battery into the battery compartment.
4.
Close the Camera Module/Battery Door.
Fig 1
Fig 2
Notes:
Your battery will last longer if you're following these simple guidelines for caring and storing:
A.
Before first time use, charge it approximately 1.5 Hours until the battery is fully charged.
B.
Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
C.
Do not charge longer than 24 hours. Excessive charging or running the unit until battery fully
drains will damage battery. Battery life will be extended if you keep the battery fully charged.
D.
Battery life naturally shortens slowly over time.
5
