OWNER’S MANUAL
CRAIN No. 745 & No. 995
DELUXE HEAT GUNS
TEMPERATURE RANGES
SAFETY PRECAUTIONS
No. 745 500
º
F – 750
º
F
No. 995 750
º
F – 1000
º
F
Check your electric line and receptacle to make
certain they are correct for the voltage and am-
perage indicated on your heat gun. If an extension
cord is necessary, a minimum 14 gauge three-prong
grounding type cord rated for outdoor use would
be used to prevent excessive voltage drop, loss of
power, or overheating.
Do not use adapters or modify the heat gun plug.
Replace damaged cords and plugs immediately.
Because the heat gun has the appearance of a
household hair dryer, keep out of the reach of chil-
dren and advise other persons having access to it of
its high heat capabilities.
WARNING: With a heat gun, as with all other heat
tools, keep a fire extinguisher handy, and observe all
sensible fire precautions.
WARNING: To reduce the risk of fire or electric shock,
do not expose heat guns to rain or moisture. Store
indoors. Connect to a grounded outlet only.
This tool emits high temperature heat at the nozzle.
Keep hands and body out of the heated air stream
and never grasp the heat gun by the nozzle. Wear-
ing protective gloves and safety glasses is recom-
mended.
Never let the heat gun operate while unattended.
Unplug the gun when not in use, or before servic-
ing.
Do not use the heat gun near combustible materi-
als, fumes, or vapors. Good ventilation is always
advised.
Do not heat chemicals. Avoid the hazards of igni-
tion, or the release of harmful vapors.
Your heat gun is equipped with a circular safety
stand that should be used when setting the tool
down, during operation of the gun, or during the
cool-down period. Never store while hot.
Although the housing and handle of your heat gun
are constructed of non-conducting material, the
gun is not recommended for use in wet or damp
areas. Never immerse the gun in water, nor stand
in water, or wet areas, while using the gun.
Your heat gun is capable of producing up to 1,000ºF
(No. 995) or 750ºF (No. 745). EXTREME CAUTION
should be exercised in its use and operating envi-
ronment. This owner’s manual should be read and
completely understood before using.
CIRCULAR
SAFETY STAND
AIR
REGULATOR
ASSEMBLY
NOZZLE -
EJECTS HOT AIR
Figure 1
