3
cramer.eu
GB
EN
•
Never blow debris in the direction of
bystanders
•
Before starting the machine, make
certain that the tube inlet is empty.
•
Keep your face and body away from the
air intake opening.
•
Do not allow hands or any other part
of the body or clothing inside the tube
inlet, discharge chute, or near any
moving part.
•
Inspect unit to ensure no foreign
material/ debris is in the machine prior
to operation.
•
Do not allow processed material to
build up in the discharge zone; this
may prevent proper discharge and can
result in kickback of material through the
intake opening.
•
Never operate the machine with
defective guards or shields, or without
safety devices.
•
Keep the power source clean of debris
and other accumulations to prevent
damage to the power source or possible
fire.
•
Always stand clear of the discharge zone
when operating this machine.
•
Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
•
Do not pull or carry by the cord.
•
Stop the machine, and remove battery
pack. Make sure that all moving parts
have come to a complete stop
-
whenever the machine is left by the
user;
-
before clearing a blockage;
-
before checking, cleaning or working
on the machine;
-
after striking a foreign object to inspect
the machine for damage;
•
If the machine starts to vibrate abnor-
mally, for immediately check
-
inspect for damage;
-
replace or repair any damaged parts;
Summary of Contents for 2400186
Page 346: ...DISTRIBUTOR INFO cramer eu ...
