English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type
40B730
Voltage
40V DC
AIR volume
12.2 m³/min
Air speed
185 km/h
Weight (Battery
Pack not included)
1.9 kg
Battery Pack
40V110/40V220
Charger
40C120/40C60
Sound pressure
level
LpA:
dB(A) K: 3 dB(A)
Sound power level
LwA:
dB(A)
Vibration level
DK
m/s
2
; K=1.5 m/s
2
DESCRIPTION
See Figure 1.
1. Cruise Control Lever
2. Trigger
3. Blower tube
4. Groove
5. Tab
6. Lock position
7. Battery release button
ASSEMBLY
UNPACKING
Carefully remove the product and any accessories
from the box.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please call
your Cramer service centre for assistance.
PACKING LIST
Blower
Blower tube
Operator’s Manual
WARNING
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require cus-
tomer installation. Use of a product that may have
been improperly assembled could result in serious
personal injury.
ASSEMBLING THE BLOWER TUBE
See Figure 2
WARNING
To prevent accidental starting that could cause seri-
ous personal injury, always remove the batterypack
from the tool when assembling parts.
Align either of the grooves on the tube with the
tabs on the blower housing. Slide the tube onto the
blower housing until the tab engages the grooves.
Turn the tube in the direction of the arrow until both
of the tabs slide into the lock positions.
TO INSTALL/REMOVE BATTERY PACK
See Figure 3.
TO INSTALL BATTERY PACK
Align the ribs of the battery pack with the mounting
slots in the blower’s battery port.
Insert the battery into the battery opening until the
battery release button locks into place.
CAUTION
When placing battery pack in the blower, be sure
the raised ribs on the battery pack align with the
grooves in the top of the blower. Make sure the bat-
tery is fully seated, and it latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
TO REMOVE BATTERY PACK
Press and hold the latch button with firm grip.
Grasp the trigger handle firmly. Pull the battery
pack out of the handle.
WARNING
Always take care of your feet, children, or pets
around you when pressing the battery release but-
ton. Serious injury could result if the battery pack
falls. NEVER remove the battery pack when in a
high location.
