Cramer KM 100 G Operation Manual Download

Page: 14 / 16

Original Operation Manual

Sweeper 689.03-40

- 14

11 Sweeping brush installation, Side cover installation

Sweeping brush installation for KM Domus, KM 100 G

Delivery, packaging, assembly

ATTENTION!

Squeezing hazard during

installation!

Parts of the body may be squeezed when

components are mounted.

Wear close-fitting clothing and

protection gloves during assembly.

Risk of high dead weight
•

The machine must not be lifted manually.

•

Pull the machine off the transporter by its handles.

•

Remove machine parts separately from packaging.

Transport inspection
•

Check the machine for completeness and potential damage upon delivery.

•

The machine shall be supplied to the specialist dealer in a partially assembled
condition.

•

Assembly and start-up have to be performed by a specialist dealer and/or an
expert in this field.

Packaging
•

Please dispose of packaging materials separately.

Overview

Right
brush

Right brush overview

Right brush

Washer

Washer with nibs

Press-fit the washer with
nibs (no. 1) into the hollow
body recess of the right
brush. Lightly hit on it as
needed.

Washer with nibs

Washer

Recess

Press-fit the washer (no. 2) in
the recess on the outside of
the right brush.

Summary of Contents for KM 100 G

















Search results

Summary of Contents for KM 100 G

Reviews:

Related manuals for KM 100 G

Brands by name

Popular brands

Cramer KM 100 G, Operation Manual

Search results

Summary of Contents for KM 100 G

Reviews:

Related manuals for KM 100 G

Brands by name

Popular brands