Original Operation Manual
Sweeper 689.03-40
- 15
2.
Left brush
1.
Left brush overview
1.
Left brush
2.
Washer
3.
Washer with nibs
2.
Press-fit the washer
with nibs (no. 1) into
the hollow body recess
of the left brush. Lightly
hit on it as needed.
1.
Washer with nibs
2.
Washer
3.
Recess
3.
Press-fit the washer (no.
2) in the recess on the
outside of the left
brush.
3.
Assemble left
and right
brush shaft!
1.
Plug feather key into
brush shaft groove.
2.
Plug brush shaft into
gear boring on the left
and right by using
feather keys.
1.
Gear boring
2.
Feather key
3.
Brush shaft
Overview
4.
Brush
assembly
1.
Push pre-assembled brushes on brush shafts
2.
Push threaded rod through entire brush unit
3.
Finally, place one washer and the locking nut onto the end of the threaded rod and tighten.
