Original Operation Manual
Sweeper 689.04-40
- 5
2.6
Safety instructions
The assembly and safety instructions
must be read and observed prior to
starting the machine.
Risk by flinging parts with running motor.
Keep a safety distance of 3 m.
Keep sufficient distance to hot surfaces.
2.7
Required protection equipment
•
Rugged footwear
•
Close-fitting clothing
•
Ear protection
•
Safety gloves
•
Protection goggles
2.8
Safety devices
•
Do not remove any covers during operation.
•
Immediately remedy any damage to safety devices.
2.9
Behaviour in case of fire
1. Stop immediately.
2. Switch off the motor.
3. Leave the machine.
4. Remedy the risk situation.
2.10 Environmental protection
•
Oils, fuels, greases and filters shall be disposed of
properly and separately in accordance with legal
regulations. Please do not dispose of any wastes in the
environment.
•
Packaging materials are recyclable. Please make sure
that they are collected for reuse.
•
Legacy devices contain valuable recyclable materials
which should be collected for reuse. These devices may
be disposed of through appropriate collection systems.
3
Design and function
3.1
Brief description
The sweeper is used to sweep up leaves and waste and is powered by a petrol motor. The sweeping brushes can be adjusted by
an angle of 45° in both directions.
3.2
Overview
1
Clutch lever for operation drive
2
Lever for sweeping brush drive (Bowden cable)
3
Height adjustment of sweeping brush
4
Swivel bracket to adjust sweeping brush
5
Attachment points for accessories
6
Hand throttle for motor capacity
7
Parking brake
8
Steering bracket
9
Drive wheel
10
Sweeping brushes