English
Sweeper
Original Operation Manual
-5
Read and observe the Installation and
Safety Instructions prior to starting the
machine.
Risk by flinging parts with running motor.
Keep a safety distance of 3m.
2.7
Required protection equipment for operation
Rugged footwear
Close-fitting clothing
Ear protection
Safety gloves
Protection goggles
The information on accident prevention regulations must also be
observed.
2.8
Safety devices
Do not remove any covers during operation.
Immediately remedy any damage to safety devices.
2.9
Behaviour in case of fire
1. Stop immediately.
2. Stop the motor
3. Leave the machine.
4. Remedy the risk situation.
2.10
Environmental protection
Oils, fuels, greases and filters shall be disposed of properly and
separately in accordance with legal regulations. Please do not
dispose of any wastes in the environment.
Packaging materials are recyclable. Please make sure that they
are collected for reuse.
Legacy devices contain valuable recyclable materials which
should be collected for reuse. These devices may be disposed of
through appropriate collection systems.
Any toxic materials (lithium-ions in batteries) must be disposed of
as instructed by the local waste management or environmental
protection authority.
3
Design and function
3.1
Brief description
The sweeper may be used for sweeping and collecting (if a sweepings container is mounted) of loose dirt or snow. Die machine has a travel drive
and is driven by a petrol engine with electric starter. The sweeper brush function may be operated by means of a lever. The sweeper brushes can
be inclined in an angle of 45° in both directions. The KM domus 82V has a motor-battery connection allowing for sweeping at the push of a button.
3.2
Sweeper KM domus 82V overview
1
Travel drive coupling lever
2
Brush drive lever
3
Electric starter
4
Splashguard motor cover (accessory)
5
Drive wheel
6
Parking brake
7
Sweeping brushes (photograph shows
accessory snow brush in white colour)
8
Attachment points for accessories
9
Sweeping brush height adjustment
10
Pivot lever for adjusting the sweeping
brush
11
Motor