English
Sweeper
Original Operation Manual
-8
Pivot lever for brush adjustment
In order to sweep dirt to a specific side, the sweeper brush may be set to the left or the right.
Change brush setting:
1. Lift pivot lever (disengage)
2. Select setting
(centre, left, right)
3. Lower swivel bracket
(engage).
Parking brake on support wheel
Brake activated: Press down the lower lever with your foot
.
Brake deactivated: Press down the upper lever with your foot
.
Attachment points for accessories
Cramer front-mounted devices (such as snow-clearing plate, sweepings container, etc.)
can be mounted at the attachment points on the sweeping brushes. For a complete list
of Cramer accessories, please refer to our catalogue or our homepage.
Mounting accessories:
Mount accessories in the provided elongated hole guide and secure them using the
included R-clips. For more details regarding accessory mounting, please refer to the
installation instructions of the relevant accessory.
R-clip
Disengage or fold steering arm; adjust steering arm height
The steering arm may be folded for transport and space-saving storage. In addition, its height
may be adjusted for a convenient working position.
Fold steering arm:
Position the pivot lever for the sweeping brushes in the
centre of the machine. Loosen the cross-headed screw.
Now slowly tilt the steering arm towards the motor cover.
Hold Bowden cables at the right and left of the motor
block.
Steering arm height setting:
Loosen the cross-headed screw. The height may be
selected using the three holes. Reinsert and tighten the
cross-headed screw at the requested height.
