CRAMERTOOLS.COM
20
EN
Version 1 - 2020.12.30
WARNING! Wear protective gloves when handling or working near the sharp blades.
WARNING! Before working on the mower itself, remove the safety key.
WARNING! Before working on the charging station or power supply, remove the plug from the mains.
•
Periodically visually inspect the mower and replace worn or damaged parts for safety.
•
Inspect that the blades rotate freely
•
Keep all nuts, bolts, and screws tight to be sure that the mower is in safe working condition.
•
The normal operating life of the blades is 2 to 6 weeks when used at maximum area capacity and longer for
smaller areas.
CAUTION: Dull blades result in the grass being cut poorly; requiring more energy and shorter time between
battery loadings.
•
Clean the mower regularly for best function.
Maintenance
Removing the Body from Chassis
Rotate the knob to the unlock position and lift firmly at one of the
corners of the body and repeat for all four corners, until the body pops
loose from the chassis.
Replace the body by aligning the body onto the chassis and press down
firmly until you hear the click. Rotate the knob to the lock position. Check
that the body is firmly attached to the chassis.
Cleaning
WARNING! Press the STOP button and remove the safety key
before cleaning.
Clean the exterior of the mower thoroughly using a soft brush, damp
cloth, and low pressure water hose, if necessary. Remove the body from
the chassis.
Turn the mower on its side and clean the blade area and wheels with a
stiff brush or scraper to remove compacted grass clippings.
