INFINITY
28
AUTOBAR
7.4.2 Disable Selections
This sub menu allows the operator to disable individual drink selections as necessary.
1.
Navigate: Product Configuration / Disable
Selections
(all drink selections). The LCD will
display the screen as shown.
2.
Press the first drink selection to be disabled, an
✔
appears in its adjacent box indicating that it is
selected. Continue until all required drink selections
have been selected.
3.
To save the new parameters to the machines
memory and return to the Product Configuration
screen, press Up One Level.
4.
On returning to standby mode, any drink selections
that have been disabled appear dimmed, indicating
to the customer that the drink choice is un-available.
For machines fitted with a carbonator it is also possible to disable either the still or sparkling option
for cold drinks.
7.4.3 SureVend
TM
Entry into this menu allows the operator to turn the SureVend™ product delivery sensor on or off.
SureVend™ Overview:
SureVend™ ensures that a cup is always available in the cup station before any money is
collected or product delivered. The sensing system is a beam of infra-red light across the cup
station that is broken by a cup as it falls into position from the cup drop unit, or by a customer
placing his own mug in the dispense area.
The SureVend™ software monitors the cup station sensor during the time that the cup ring is
operated and for three seconds afterwards. If a cup is not detected the software will then attempt
to drop a cup a second and if necessary, a third time.
After three failed vend attempts the cup ring is placed temporarily out of service. The machine will
beep once and the LCD will display the Vend Failed message (if set to Pay Vend mode).
Customers can now get their money back by pressing the coin return button or removing their
card. The LCD will change and display the message Out of Cups Please Insert Mug. The
machine remains in service but will not vend a cup from the cup drop unit.
To clear the message and return to standby mode;
1.
Open the door and press button 14 on the Service keypad (see Section 4 - Service
Keypad Functions for details).
2.
Check and, if necessary, clear the cup drop unit. Ensure correct operation before
leaving the machine.
To configure SureVend™, proceed as follows:
1.
Navigate: Product Configuration / SureVend
TM
.
N.B. By default SureVend™ is factory set to On as indicated by the status line at the
bottom of the screen.
Se
ctio
n 7
- O
pe
rato
rʼs
P
rog
ram