Page
122
of
128
CLEANING
DO NOT USE A WATER JET OR NOZZLE TO CLEAN THE VENDER
GLASS DOOR
The display glass should be cleaned inside and out with paper towels and glass or non-abrasive all-purpose
cleaner. The gasket around the product door should be wiped down using warm water, any mild general
purpose, non-abrasive cleaner and a soft towel. Never lubricate the gasket and always check for cracking or
deformities which may cause leaks. Replace if necessary.
TRAYS / TRAY INSERTS
The trays and tray inserts should be cleaned periodically using warm water and a mild general purpose, non-
abrasive cleaner. Care should be taken to ensure debris does not enter the gear box assemblies.
DO NOT
USE SOLVENTS OR ABRASIVE MATERIALS TO CLEAN ANY PORTION OF THE TRAY.
SLIDE/PUSHER ASSEMBLY
The slide/pusher assembly should be cleaned periodically using warm water and any mild general-purpose
non-abrasive cleaner. After drying, the slide assembly needs to have a coat of Armoral applied. Care should
be taken to ensure debris does not enter the gear box assemblies.
DO NOT USE SOLVENTS OR
ABRASIVE MATERIALS TO CLEAN ANY PORTION OF THE TRAY.
DOOR LIGHTING
The machine is designed with an energy efficient LED Lighting System. To ensure continued reliable
operation, replace only with the same type and size lamps. Lamps must be properly installed and connected.
CABINET
Wash the cabinet with a good detergent or soap mixed in warm water. Wax the vender often with a good
grade of automobile wax. Any corrosion inside the vender should be removed with fine steel wool and the
area should be painted with white paint.
Repair any scratches on painted surfaces to prevent corrosion.
DRAIN PAN, DRAIN TUBE, AND DRAIN HOSE
To prevent mold and mildew growth,
and to avoid personal injury or property
damage, the drain pan, drain tube, and
drain hose must be properly aligned
and routed. Ensure nothing obstructs
the drain tube or drain hose and that
the hose is not bent, pinched, or
twisted in such a way as to prevent the
flow of condensate. Periodically
inspect the drain pan, drain tube, and
drain hose for alignment and the
presence of dirt, debris, mold, and
mildew. Clean as needed.
WARNING
THE COMPRESSOR ELECTRICAL CIRCUIT IS ALWAYS LIVE WHEN THE PLUG IS CONNECTED TO AN
ELECTRICAL OUTLET.
