Page
29
of
128
Error
Description
Probable
Cause
Possible
Solutions
X Motor Failure.
The control board is reporting that the X motor is
Check for proper connections to the motor.
not functioning.
Check for damage to the harnessing.
Check for proper switch function.
Check for over tightening of the motor.
Replace the motor.
Y Motor Failure.
The control board is reporting that the Y motor is
Check for proper connections to the motor.
not functioning.
Check for damage to the harnessing.
Check for proper switch function.
Check for over tightening of the motor.
Replace the motor.
Picker Motor
The control board is reporting that the picker motor
Use the position test functions to test the picker motor.
Failure.
is
not
functioning.
Replace
the
picker
cup.
Port Motor
The control board is reporting that the port motor
Use the port test functions to test for function
Failure.
is
not
functioning.
Check
wiring
connections.
Check switch functions including the position cam.
Replace the motor.
Vend Timeout.
The control board is reporting that a successful vend
Check for a picker cup that did not return to the home
cycle has not been completed in the allowed amount
position.
of time.
Check for a port door that did not open/close."
Cabinet Failure.
An error that has not yet been defined.
Should not be seen in a machine.
Replace the control board.
Coin Return
The control board is reporting that the coin return
Check the wiring connections.
Motor Failure.
Motor has failed.
Check for proper mounting of the motor.
Check for proper mounting of the coin mechanism.
Replace the coin return motor.
Picker Home
The control board has reported that the picker
Use the position test functions to test or cycle the
Failure.
has failed to return to its home position at the
picker back to its home position.
end of a cycle.
Replace the picker cup.
Temperature
The control board is reporting that the
Compare the reported temperature against a
Sensor
Error.
temperature
sensor
has
failed.
Thermometer.
Replace the temperature sensor.
