Page
84
of
128
Press the Inactivity Minutes icon to open a window allowing you to use the numeric icons to enter a
number of minutes that the vender goes with no activity before the
power save will enable and turn off the lights and also changes the
Refrigeration Set Point to the Storage Set Point value. Default
setting is 0.
Press the Light Timer icon to open a window allowing you to use the numeric icons to enter a number of
hours that the vender goes with no activity before the power save will enable and turn off the lights.
Default setting is 10 hours. This may not be disabled and id
independent from the Power supply events.
REMEMBER TO SAVE YOUR SETTINGS OR YOUR WORK WILL BE LOST!
12.
TELEMETRY
……….Press the icon to bring up the first screen.
Press the zero Telemetry icon will bring up the first screen listing the telemetry options.
Use the icons to choose an option.
Choosing an option will bring up the first screen for that option.
1.
Press the Assign unit
icon to Assign a Unit.
ASSIGNING AN ATLAS UNIT (board)
Required items for assigning an Atlas Unit via onboard Telemetry Service Mode menu:
1. A USB flash memory stick.
2. A folder must be created on the flash memory stick and named “atlas”.
3. A file must be copied and pasted in the atlas folder. (VIXConfigData.cfg)
4. The file is received by e-mail after setting up an account with Streamware.
Power Save Events
Inactivity minutes
0
Power Save Events
Create Event >
Power Save #1 >
Light Timer
10
Telemetry
Assign unit >
Ping Server >
Get Network Status >
Show Network Config >
Load Network Config >
Assign unit
Unable to find configuration
file. Please insert the flash
drive with the proper
configuration file.
Retry >
