3
SPECIFICATIONS:
MODEL: BAF-6 (091550)
LOCATION:
This BAF-6 is designed for wet wells, tanks, or lift stations where it is necessary to
remove a pump from service and reinstall the pump without maintenance personnel
entering the pit to unbolt the pump fl anges.
STATIONARY ELBOW:
Cast iron, ASTM A48, Class 30.
MOVABLE FITTING:
Cast iron, ASTM A48, Class 30.
GUIDE RAIL CAP:
Bracket:
304 stainless steel
Plugs:
Ductile
iron,
ASTM
A536-84.
HARDWARE:
300 series stainless steel.
O-RINGS:
BUNA-N, 70 +/- 5 Duro.
GASKETS:
Rubber
PAINT:
Air
Dry
Enamel
MODEL: BAF-E6 (091551)
LOCATION:
This BAF-6 is designed for wet wells, tanks, or lift stations classifi ed as Hazardous
location Class 1, Group D, Division 1 and/or non-hazardous locations, where it is
necessary to remove a pump from service and reinstall the pump without
maintenance personnel entering the pit to unbolt the pump fl anges.
STATIONARY ELBOW:
Cast iron, ASTM A48, Class 30.
MOVABLE FITTING:
Bronze
(81-3-7-9).
GUIDE RAIL CAP:
Bracket:
304 Stainless steel
Plugs:
Ductile
iron,
ASTM
A536-84.
HARDWARE:
300 Series stainless steel.
O-RINGS:
Buna-N, 70 +/- 5 Duro.
GASKETS:
Rubber
PAINT:
Air
Dry
Enamel
OPTIONAL:
INTERMEDIATE SUPPORT:
Bracket:
304 Stainless Steel.
Plugs:
Cast iron, ASTM A48, Class 30.
Hardware:
300 Series Stainless Steel.
O-Rings:
Buna-N, 70 +/- 5 Duro.
LIFTING CHAIN:
5/16, or 3/8 in., proof coil chain, hot galvanized.
Testing is performed with
water, specifi c gravity of
1.0 @ 68° F, other fl uids
may vary performance
Summary of Contents for 091550
