4
USER GUIDE
Congratulations on
your purchase of a Barnes
Ultra
GRIND™ grinder
pump system. With proper care and by following
a few simple guidelines your grinder pump will
give you many years of dependable service.
Use and Care
The
Ultra
GRIND grinder pump station is
designed to handle routine, domestic sewage.
Solid waste materials should be thrown in the
trash. While your station is capable of accepting
and pumping a wide range of materials,
regulatory agencies advise that the following
items should not be introduced into any sewer
either directly or through a kitchen waste
disposal:
• Glass
• Metal
• Diapers
• Socks, rags or cloth
• Plastic objects (e.g., toys, utensils, etc.)
• Sanitary napkins or tampons
In addition you must
NEVER
introduce into any
sewer:
• Explosives
• Flammable Material
• Lubricating Oil and/or Grease
• Strong Chemicals
• Gasoline
General Information
Your home wastewater disposal service is part of
a low pressure sewer system. The key element
in this system is the Barnes
Ultra
GRIND grinder
pump station. The basin collects all wastewater
from the house. The solids in the sewage are
then ground to a small size suitable for pumping
in the slurry.
The grinder pump
generates suffi cient
pressure to pump this slurry from your home to
the wastewater plant.
Power Failure
Your grinder pump cannot dispose of wastewater
or provide an alarm signal without electrical
power. If electrical power service is interrupted,
keep water usage to a minimum.
Warranty
Your grinder pump is furnished with a warranty
against defects in material or workmanship. A
properly completed
Start-Up/Warranty Registration form must be
on fi le at the Barnes factory in order to activate
your warranty. In addition your pump must be
installed in accordance with the installation
instructions.
If you have a claim under the provisions
of the warranty, contact your local Barnes
Distributor.
When contacting your representative for service,
please include your station serial number,
pump model number, and pump serial number.
For future reference, record the following
information:
Station Serial No:
Pump Model No:
Pump Serial No:
Local Distributor:
Distributor Telephone:
Summary of Contents for Barnes PS Omni Grind Plus OGP2022CO Series
