Crane BevMax 4 Technical Manual Download

Page: 16 / 103

SERVICE MODE MENU ITEMS

Note: Menu items

with the ** are

not currently

available.

SERVICE MODE

Enter SERVICE MODE by opening the service door
and pressing the Service button once. The display
will read “

SERVICE MODE”.

The following choices

are now available:

NEXT ITEM

- Press key “A”

CASH BOX

- Press key “B”

Shows the amount of change diverted to the cash
box from the coin mechanism since the last CLEAR
TOTALS or MASTER RESET. To view the cash box
totals, press the letter “B” on the keypad and the
display will show “CASH BOX”, then press the “

”

key and the display will show Cash Box $#.##.
Press the “CLR” key to return to “CASH BOX”.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below.

SALES (displayed if BevMax 4 5800-4
only)

Press key “C”

TOTAL SALES (displayed if BevMax 4
5800-4 with Snack Vender attached) -

Press key “C”
Shows total sales since last CLEAR TOTALS or
MASTER RESET. This total includes change not
diverted to the cash box and still being held in coin
mechanism escrow tubes. To view the total sales
press the letter “C” on the keypad and the display
will show 1 - “SALES” if BevMax 4 5800-4 only, then
press the “

” key and the display will show Sales

#.##. Press the “CLR” key to return to “SALES”.
Press the “CLR” key to return to “SERVICE MODE”
or press the “A” key to advance to the next menu
item below. 2 - “TOTAL SALES” IF BevMax 4 5800-
4 with Snack Vender attached, then press the “

”

key and the display will show “Drink Sales #.##”.
Press the “

” key and the display will change to

“Snack Sales #.##”. Press the “CLR” key to return to
“SALES” or “TOTAL SALES”. Press the “CLR” key
to return to “SERVICE MODE” or press the “A” key
to advance to the next menu item below.

DISPLAY TEMPERATURE

Press key “D”

Shows the cabinet temperature in degrees Celsius
or degrees Fahrenheit. Press the letter “D” on the
keypad. The display will show ”Display
Temperature”. Press the “

” key and the display

will show “Display: ON (or OFF) Press “*” – turn OFF
(or ON)”. Press the

Key to toggle on/off or press

the CLR Key to not change settings. If “on” is

selected the Display will change to “Set
Temperature Unit Degrees F (or C) showing the
current setting temperature will be displayed. Press
F for Fahrenheit or C for Celsius. Press the

Key

to save and return to “Display Temperature.” Press
the “CLR” key to return to “SERVICE MODE” or
press the “A” key to advance to the next menu item
below.

SET REFRIG TEMP

–

Press

Key “E”

Allows the service technician to set the average
product temperature (set point) for initial pull down
and reload recovery. Press the letter “E” on the
keypad and display will show “SET REFRIG TEMP”.
Press the “

” key on the keypad and the display will

read “tt.tx” where x is Fahrenheit or Celsius and tt.t
is the degrees. To change the set point press the
key numbers you wish the set point to be
(temperature set must be between 32º and 75º F or
0º and 23.8º C). Press the “

” key to save the new

set point temperature and return to “SET REFRIG
TEMP”. Press the “CLR” key to return to “SERVICE
MODE” or press the “A” key to advance to the next
menu item below.

CLEAR TOTALS

Press key “F”

Allows the service technician to clear totals in CASH
BOX, SALES, NUMBER SOLD, DOOR OPENINGS,
POWER OUTAGES, SALES BY COLUMN, and all
other interval data. Press the letter “F” on the
keypad and the display will show “CLEAR TOTALS”.
Press the “

” key, the display will read Clear Interval

Data?

= Y CLR = N. Press the “CLR” key to return

to “Clear Totals” with out resetting the totals. Press
the selection you wish to use and display will return
to “Clear Totals”. Press the “CLR” key to return to
“SERVICE MODE” or press the “A” key to advance
to the next menu item below.

NUMBER SOLD

Press key “1”

Shows the total number of items sold since the last
CLEAR TOTALS OR MASTER RESET. Press the
number “1” on the keypad and the display will show
“NUMBER SOLD”. Press the “

” key and the

display will show “Number Sold #”. Press the “CLR”
key to return to “Number Sold”. Press the “CLR” key
to return to “SERVICE MODE” or press the “A” key
to advance to the next menu item below.

ENABLE ITEM

Press key “2”

Allows an individual selection, a complete tray, or
the entire machine to be enabled or disabled. This is
most commonly used when a selection is out of
order and you are awaiting parts and do not want
the customer to utilize that selection. Press the
number “2” on the keypad and the display will show
“ENABLE ITEM”. Press the “

” key and the display

will read “Enter Selection”. There are now three
choices: