32
CABINET
Wash the cabinet with a good detergent or soap
mixed in warm water. Wax the vender often with
a good grade of automobile wax. Any corrosion
inside the vender should be removed with fine
steel wool and the area should be painted with
white paint.
Repair any scratches on painted surfaces to
prevent corrosion.
DRAIN PAN, DRAIN TUBE, AND DRAIN HOSE
To prevent mold and mildew growth,
and to avoid personal injury or
property damage, the drain pan,
drain tube, and drain hose must be
properly aligned and routed. Ensure
nothing obstructs the drain tube or
drain hose and that the hose is not
bent, pinched, or twisted in such a
way as to prevent the flow of
condensate. Periodically inspect the
drain pan, drain tube, and drain hose
for alignment and the presence of
dirt, debris, mold, and mildew. Clean
as needed.
WARNING
THE COMPRESSOR ELECTRICAL CIRCUIT IS
ALWAYS LIVE WHEN THE PLUG IS CONNECTED
TO AN ELECTRICAL OUTLET.
REFRIGERATION CONDENSER
Clean the condenser periodically of dirt or lint
build-up. Remove the build up with a brush or
vacuum, or blow the dirt out of the condenser
with compressed air and approved safety
nozzle. Ensure nothing obstructs air intake at
the bottom of the main door. Ensure nothing
obstructs air exhaust at the rear of the cabinet.
COIN ACCEPTOR
Follow the Coin Acceptor Manufacturer’s
instructions.
LUBRICATING THE VENDER
The vender refrigeration system does not
require any field lubrication. The hermetic
refrigeration system and fan motors are
manufactured with lifetime lubrication.
NEW CONTROL BOARD INSTALLATION
Set Model Number. On power up the display
will show “Reset Model? Continue?
= Yes
CLR = No”. Pres the
key and display will
show “No Model Set Save? A = ^ (scroll up)
=
Yes CLR = No”. Press key A to scroll through
available model numbers DN5800-4, DN3800-4,
DN5800-E4 (export), DN3800-E4 (export). With
vender model displayed that you are installing
board press the
key to save.
Summary of Contents for BevMax 4
