BevMax_Media_Programming_10_6_10 Page 14 of 106 08/15/2013
Error
Description
Probable
Cause
Possible
Solutions
Coin Mech Tube Error.
Coin mechanism not sensing a payout tube.
Check for proper pay out cassette placement.
Replace the payout cassette.
Replace the coin mechanism.
Coin Mech Disabled.
Coin mechanism has been disabled by the board
Power down the machine and re-start.
Remove bill validator and/or card reader from system.
Replace the coin mechanism.
Reset the control board.
Replace the control board.
Exec Price Error.
Executive coin mechanism error.
Check for a price set outside of allowed parameters.
Replace executive coin mechanism.
No Monetary Device.
No monetary device detected by the board.
Check connectors to be properly installed.
Check harness for damage.
Retest without the bill validator and harnessing
Installed.
Replace the coin mechanism.
Coin Return Motor Not
Control board not sensing the presence
Check the connection J6 on the I/O board to the
Present.
of a coin return motor.
coin return motor.
Home the coin return motor.
Replace the coin return motor.
Check for damage to harnessing.
Reset or replace the control board.
Coin Return motor Run
The board has determined that the coin
Check
the
connections
to the coin return motor.
Time Timeout.
return motor should have arrived at home
Home the coin return motor.
position, but it has not.
Replace the coin return motor.
Check for damage to harnessing.
Reset or replace the control board.
Coin Return Motor Short
Coin return motor has shorted out.
Check connections and harnessing for damage.
Circuit.
Replace
the
coin
return
motor.
Coin Return Motor Drive
The coin return motor is not engaging the
Check for damaged or missing drive linkage.
Failure.
coin return arm on the coin mechanism.
Check for proper mounting of coin mechanism.
Check for damage on coin mechanism pay out parts.
