BevMax_Media_Programming_10_6_10 Page 61 of 106
08/15/2013
Added options include:
In the TEST mode functions, #3 in first screen and #6 in the second screen are added reliability tests,
shifting the other entries down. These tests are meant for Factory Engineering use only and should not
be used in the field.
Press the numeric Keys to choose a function.
Choosing a function will bring up the first screen within each
function.
In the Special Vend Modes functions, #6 a function called “Trade Show Vend Bypass” was added in the
#5 position shifting other entries down.
Use the numeric Keys to choose a function.
Use the 5 Key to toggle between On and Off for the
Trade Show Vend ByPass function.
In the Security Codes Mode functions, #4 a Change Engineer PIN function was added.
Press the 4 Key will open a window that will allow you to change the
Engineer PIN. Use the numeric Keys to enter a new 4 digit number.
Use the center section of the OK Key to lock in the new number.
This feature is meant for Factory Engineering use only and should not be used in the field.
Test
1) Test Vend >
2) Coin Return Motor >
3) Reliability Test >
4) Surround Lighting Test >
5) Screen Test >
6) Refrigeration Test >
7) MagTeck Head Test >
8) Cashless system test >
9) Manufacturing Tests >
9) Monetary >
1) Manufacturing Tests (repeat) >
2) Monetary >
3) Port and Cup Sensors >
4) Platform Movement >
5) Other Relays >
6) Reliability Keypad Test >
7) Keypad Test >
Special Vend Modes
1) Free vend
Off
2) Winner Mode
>
3) Combo Vends
>
4) Token Enabled
>
5) Trade Show Vend ByPass
No
6) Rapid Vend
No
7) MultiVend Discount
>
Security Codes
1) Enter PIN >
2) Change Driver PIN
3) Change Operator PIN
4) Change Engineer PIN
