BevMax_Media_Programming_10_6_10 Page 67 of 106
08/15/2013
Press the 5 Key to open a window allowing you to use the numeric keypad to
enter a time of day for the event to begin.
Press the 6 Key to open a window allowing you to use the numeric keypad to
enter a time of day for the event to end.
Press the 7 Key to bring up a screen allowing you to choose the days of the week
when the event will be active. The checked days are active.
A. Use the top and bottom of the OK Key to scroll thru
the screens.
B. Use the 1 Key to check all the days of the week at once.
C. Use the 2 Key to un-check all the days of the week at once.
D. You do not need to save the choices here, just return to the set up menu for the event and proceed.
Press the 8 Key to bring up a tray list.
Use the numeric Keys to choose a tray.
Choosing a tray will bring up a screen
listing all the selections on that tray.
Some selection lists will use more than one
screen.
Use the top and bottom of the OK Key to scroll thru the entire list.
Use the numeric Keys to check or un-check the selections as
needed. Checked selections will be involved in the event.
REMEMBER TO SAVE YOUR SETTINGS OR YOUR WORK WILL BE LOST!
3.
Press the 3 Key will bring up a screen listing the options for Inhibit.
Press the 1 Key here will create an event and begin a list of saved events that can be set up as needed.
Use the numeric Keys to choose a created event to set up
for use and another screen will come up allowing you to
configure the event to fit your needs.
Days of week
1) Set All
2) Clear All
3) Monday
4) Tuesday
5) Wednesday
6) Thursday
7) Friday
8) Saturday
Second Screen
1) Saturday (repeat)
2) Sunday
Tray #2
1) Add all selections
2) 201
3) 202
4) 203
5) 204
6) 205
7) 206
8) 207
9) 208
Second Screen
1) 208 (repeat)
2) 209
Selections for event
1) Tray 1
2) Tray 2
3) Tray 3
4) Tray 4
5) Tray 5
6) Add all selections
Inhibit
1) Create Event >
There is no inhibit event on this
machine. You can create one if it’s
needed.
Time of Day Events
1) Price Adjust >
2) Free Vend >
3) Inhibit >
Inhibit
1) Create >
2) Inhibit #1 >
3) Inhibit #2 >
