Crane EE-5063, Instruction Manual

5

TECHNICAL SPECIFICATIONS:  
 

Rating Voltage 

120V  

Frequency 60Hz 
Power 45W 
Water Tank Capacity 

Approx. 1.0 Gallon / 3.78 
Liter 

Output Per 24 Hours 

Approx. 2.1 Gallon / 8 

Liter 

Run Time Per Tank 

Min. 11 Hours 

Humidifying Capacity 

Up to 500 sq.ft. / 46 m2  

Noise 

< 36.5 (dB) A 

 
CONTENTS OF PACKAGING 
 

a.

Instruction Manual 

b.

Central Humidifier Body 

c.

Water Tank 

d.

Water Tank Lid with Vapor Output Slots 

If any of the above items are missing, please contact our service department at 1-888-

599-0992 (http://www.crane-usa.com) for replacement. Business hours Mon-Fri 9:00am 

- 4:00pm CT 

OPERATION AND USE 
  
BEFORE EACH USE 

 
CHECK HUMIDIFIER PLACEMENT - Place the Humidifier on an elevated non-metallic 
waterproof surface for best performance.   This is to help disperse the mist in the air, 

and prevent it from being knocked or tipped over. 
 

CHECK WATER LEVEL SENSOR - Make sure that the water level sensor is secured 
properly.  Refer to “cleaning and maintaining water level sensor” on page 9 for 

instructions on how to assemble water level sensor. 
 

CHECK FAN VENT - This fan vent is located on the bottom of the humidifier.  The 
purpose of the Fan Vent is to blow the cool mist through the vapor outlet slots.  It is 
important that this part is kept clean and free of obstructions.  We recommend checking 

the fan vent before using this item (i.e. lint, paper)   
 

Do not place Humidifier on top of a towel, or a carpeted surface. The air vent on 
the bottom may become blocked, and overheat the humidifier. 

 
CAUTION:   

DO NOT operate the humidifier without water in the water tank. 
DO NOT plug in the cord with wet hands; electric shock could happen