Merchant™ Operators’ Guide
Program: System Settings
1810025
145
August 2009
Set Accept on Low Change (continued)
B. This value also tell the merchandiser how
much the customer is allowed to overbuy a
product. The customer will be short-changed
when an overbuy occurs.
For example: for a value of 00.25, if there is
no change in the coin mech, and the
customer inserts a $1.00 bill, a $0.75
product can be purchased even though
change cannot be paid back. The customer
will be short-changed. Normally, a purchase
will not be approved unless all change can
be paid. Entering 00.00 means that the vend
will only be approved when the correct
change can be returned (overbuy disabled).
5. Press
to lock in the selection and
return to the
Monetary
menu. Verify that the
status (bottom) line displays the bill value
that
Accept on Low Change
is set for.
6. Press
once to return to the
System Settings
menu or twice to return to
the
Main Menu
.
Monetary
Card Reader
5
Multiple Vend Mode
Change Without Purchase
Low Change Message
Accept on Low Change
6
= $ 5.00
Summary of Contents for Merchant Six 180
