Merchant™ Operators’ Guide
Program: System Settings
1810025
197
August 2009
448/449 Merchant Refrigeration Removal
1.
Open the door and turn the power off.
2.
Lower the delivery bin and remove the stop rod.
3.
Unplug the harness to the Surevend boards and remove it from where it runs along the front of
the machine floor. Set the harness to the right out of the way.
4.
Remove the delivery bin. (
taking care not to damage the insulation
).
5.
Remove the bottom tray from the machine to gain access to the horizontal barrier.
6.
Unplug the harnesses to the refrigeration unit and temperature sensors on the left side of the
refrigeration unit. Take the harnesses off where they run along the top of the horizontal barrier.
7.
Remove the screws along the back of the horizontal barrier and the screws holding the front left
and right side angle brackets.
8.
To remove the horizontal barrier you
must lift the barrier up before
pulling it forward and out
of the machine.
9.
Remove the condenser inlet screen on the floor of the machine.
10.
Remove the bolt holding the refrigeration lock plate on the left side. The plate can be removed
by using a large screwdriver as a lever to pry it up and out.
11.
Slide the refrigeration unit forward and to the left and out of the front of the machine.
448/449 Merchant Refrigeration Installation
1.
Reverse procedures above to install the refrigeration unit.
2.
Be sure to push the unit to the back and to the right. The bolt hole in the refrigeration lock plate
will line up with the bolt hole in the floor of the machine when the unit is position correctly.
3.
Tap the lock plate down and into position.
4.
After completing the installation, test the machine for proper operation.
Service
Summary of Contents for Merchant Six 180
