O
PERATION
G-13.mft standard/Casino/SGI/BDTA/AMU
34
National Rejectors, Inc. GmbH, Buxtehude
S1
S2
If all coin types are to be accepted for payment by the machine, the DIL
switches S1.1–S1.8 and S2.1–S2.8 of the two switching blocks are in the
lower position (on OFF). If you want to inhibit a coin channel, you only need
to move the respective DIL switch toward the top to ON.
Example
The coin validator is no longer supposed to accept the coin(s) assigned to coin
channels 3 and 10, which means that coin channels 3 and 10 must be inhibited
With the DIL switches in these positions, the coin validator no longer accepts the
coin type(s) assigned to coin channels 3 and 10!
If a normal coin channel and a narrow coin channel have been
programmed on the coin validator for one coin type, the normal coin
channel must be inhibited as described above in order to activate
the narrow coin channel. If both channels are activated, the wider
acceptance band of the normal coin channel is used.
If the coin type is to be inhibited, both coin channels must be
inhibited.
To inhibit coin channels on the validator:
1
Unhook the coin validator from the machine.
2
Inhibit the desired coin channels using the DIL switches S1.1–8 and
S2.1–8 (cp. example above).
The desired coin channels are inhibited.
3
Hang the coin validator back in the machine.
Summary of Contents for NRI G-13.mft Standard
Page 2: ......
