G-13.mft standard/Casino/SGI/BDTA/AMU
O
PERATION
39
National Rejectors, Inc. GmbH, Buxtehude
To reassign a coin type to a coin channel, please proceed as follows:
If you are using the lower switching block to inhibit individual coins,
remember the current switch settings so that you can restore them
easily for the normal operating mode at the end.
1
Set all DIL switches 1–10 toward the
bottom to OFF.
2
Set DIL switch S2.9 toward the top to
ON.
Now the device is in teach mode to
teach the coin channels.
3
Release the coin channel to be taught
(9–16 or 25–32, here: 11 or 27) by
setting the appropriate DIL switch
(S2.1–8, here: S2.3) toward the top to
ON.
4
Insert at least 10 coins of the new coin type/token into the coin
validator or machine.
After the 10
th
coin has been inserted, the acceptance gate is
operated once (brief clacking sound). Additional coins can be
inserted.
You must insert at least 11 coins in devices with a wake-up sensor,
as the first coin is only used to wake-up the validator and is not
valued.
S2
S2
S2
Summary of Contents for NRI G-13.mft Standard
Page 2: ......
