O
PERATION
G-13.mft standard/Casino/SGI/BDTA/AMU
40
National Rejectors, Inc. GmbH, Buxtehude
Now you can save the measured values generated by the inserted coins in
either a normal (a) or a wide (b) acceptance band. A wide acceptance band
is an appropriate choice when you only have a limited selection of coins at
your disposal for the purpose of teaching tokens.
To save with the normal acceptance band:
5a)
Set DIL switch S2.9 toward the
bottom to OFF.
Successful saving is signalled by
the acceptance gate attracting once, an error when saving is indicated
by the acceptance gate attracting twice (brief clacking sounds), if, for
example, the acceptance band of the coins inserted and the acceptance
band of an already programmed coin channel overlap.
To abort the operation, first set the DIL switch of the respective coin
channel (here: S2.3) and then DIL switch S2.9 toward the bottom to
OFF.
To save with a wide acceptance band:
b)
Set DIL switch S2.10 toward the
top to ON.
The acceptance band has been
widened.
Now you can set DIL switch S2.9
toward the bottom to OFF.
Successful saving is signalled by
the acceptance gate attracting once, an error when saving is indicated
by the acceptance gate attracting twice (brief clacking sounds), if, for
example, the acceptance band of the coins inserted and the acceptance
band of an already programmed coin channel overlap.
To abort the operation, first set the DIL switch of the respective coin
channel (here: S2.3) as well as DIL switch S2.10 and then DIL
switch S2.9 toward the bottom to OFF.
6
If necessary, set DIL switches S2.1–8 for the normal operating mode
(see section "Inhibiting coins/activating narrow coin channel" in this
chapter).
The new coin type/token will now be accepted for payment by the coin
validator.
S2
S2
S2
Summary of Contents for NRI G-13.mft Standard
Page 2: ......
