T
ECHNICAL
DATA
G-13.mft standard/Casino/SGI/BDTA/AMU
50
National Rejectors, Inc. GmbH, Buxtehude
Interfaces (pin assignment and connection diagrams)
On the following pages you will find interface descriptions, pin assignments
and connection diagrams for the connection of the G-13.mft to
•
the machine
•
an external sorting device
G-13.mft standard/Casino model – machine
Pin assignment
Pin 1
–
Ground (GND)
Pin 2
–
Operating voltage U
O
= +12 V (10 V–16 V DC)
Pin 3
OUT/IN
Coin line 5: active low/
single inhibit line 5: active low
Pin 4
OUT/IN
Coin line 6: active low/
single inhibit line 6: active low
Pin 5
OUT
Return/cion acceptance/sorting/wake-up line: active low
Pin 6
IN
Common inhibit line: active high
With the G-13.mft model for the Australian market (G-13.mft 6xV)
the common inhibit line is inverted (active low).
Pin 7
OUT/IN
Coin line 1: active low/single inhibit line 1: active low
Pin 8
OUT/IN
Coin line 2: active low/single inhibit line 2: active low
Pin 9
OUT/IN
Coin line 3: active low/single inhibit line 3: active low
Pin 10
OUT/IN
Coin line 4: active low/single inhibit line 4: active low
All signals must be debounced from the input side.
Interface description
Coin lines/single inhibit lines
•
Coin validator signals coin accepted in the corresponding coin
channel (usually with one impulse, if there are insufficient lines with
multiple impulses)
•
Machine inhibits coin recognized in the respective coin channel
1
2
10
9
Summary of Contents for NRI G-13.mft Standard
Page 2: ......
