Page 14
April, 1999
SNACK/REFRESHMENT CENTER PROGRAMMING GUIDE
1670002
2.
Press
until one of the following is displayed:
ACC
<
$$ X.XX
- The last bill which meets or exceeds maximum price will
be held in escrow.
O R
ACC.STK X.XX
- The last bill which meets or exceeds maximum price and
MDB coupon bills (token bills) will be immediately
stacked.
Example:
If setting is
ACC.STK 1.00
and maximum price is $1.50.
This setting will immediately stack the second $1.00 bill
inserted.
Press
to display the desired choice.
The value of "X.XX" has two purposes:
a.
The value of "X.XX" tells the machine how big a bill or coin to accept
even though there is not enough change in the coin mech to cover all
possible paybacks.
• For example, enter 1.00. Therefore, the machine will take a dollar bill or
coin even though there is less than $1.00's worth of change. Entering
5.00 tells the machine to take a five even though there is less than
$5.00's worth of change, and so forth.
NOTE: This could cause a customer to be short-changed.
• Entering 0.00 means that bills or coins will only be accepted if there is
enough change to cover them.
b.
The value of "X.XX" tells the machine how much the customer is allowed
to overbuy a product. The customer will be short-changed when an
overbuy occurs.
Example:
For a value of $0.25: if there is no change in the machine and the
customer insers a $1.00 bill. The customer can purchase a product for
$0.75 even though the change cannot be paid back. The customer will
be short-changed. Normally a purchase will not be approved unless all
change can be paid.
Entering 0.00 means that the vend will only be approved when the
correct change can be returned (overbuy disabled).
3.
Press
until you have left the function.
Summary of Contents for Refreshment Center 784
Page 59: ......
