Safety system
These steps clearly explain how the push away safety system works. It is simple and safe.
Follow these steps every time before riding, because the safety system can get worn out and may not work properly. So before every rid-
ing sessions, check carefully if the safety system is working.
1. In case of an emergency, simply push away the red
plastic part with “C” logo.
3. Now the chicken loop is opened. This kills rapidly the
power of the kite. You are now connected to the kite
only via the safety leash, which should also be releas-
able in a case of extreme emergency.
5. Hold the chicken loop in your left hand and the red
plastic safety part in your right hand and push away
the red plastic safety part.
7. Make sure that there is no sand or dirt inside the
safety system.
2. This releases the safety pin.
4. To re-assemble the safety system, put the metal oval
ring of the chicken loop on the safety pin.
6. This opens the space to put the safety pin back
inside. Push the safety pin back inside the metal part
and slowly slide down the red plastic safety part.
8. Rinse the safety system with clean water after every
ride if possible.
