CreamWare Noah, Hardware Manual

4

 Hardware

Index

 Contents

15 - Utility

Use this button to open a menu with
various functions e.g. for managing
presets.

For more information see: 

Operating Noah:

Presets, The Utility Menu

16 - Edit Button

Puts the unit into Edit mode. When 

Edit

Mode is active, the LED below the button
is lit.

For more information see: 

Edit Mode

17 - External Button

In several menus, you can use this button
to route Read/Write functions to the
Compact Flash Card. When this Routing
is active, the LED below the button is lit
(red).

18 - FX Bypass Button

Pressing the 

FX Bypass Button (18)

temporarily mutes effects. Keeping the
button pressed will open a menu where
you can specify in more detail which
effects will be muted or not when the 

FX

Bypass Button (18) is pressed.

When Bypass is active, the LED below
the button is lit (red).

For more information see

: 

Edit Mode: The

FX Bypass Menu – Muting Effects

19 - Compare Button

Lets you toggle between the current and
the previously stored settings of the
selected preset.

For more information see: 

Operating Noah:

Presets

20 - Write Button

Opens the menu pages for storing
presets.

For more information see: 

Operating Noah:

Presets

21 - Power Button

Press the button to switch the Noah unit
on or off. To start up Noah, press the
button once briefly. Keeping the button
pressed for a few seconds will switch
off the unit.

Even when switched off, Noah
consumes a certain, low amount of
power (standby mode). For transport
purposes or if you want to switch off the
unit for a longer time, you must use the
Main Power Switch (1) on the back.