Assembly
MODEL PS10LIN
19764-100 Rev D (05-10)
© Copyright 2010, Creative Playthings
3DJH
PRE ASSEMBLY INFORMATION
We have packaged more hardware than is required for assembly.
&5($7,9(3/$<7+,1*63/$<6(7686($)(:67$1'$5'&211(&7,216
BECOMING FAMILIAR WITH THESE CONNECTIONS WILL SIMPLIFY ASSEMBLY AND
INSURE A SAFER PLAY PRODUCT FOR YOUR CHILDREN.
+H[%ROW :HOG1XW$VVHPEO\3URFHGXUH
Assembly Layout:
Align the holes in the parts to be fastened. Start
preliminary tightening of bolt into weld nut by
hand. Tighten each bolt with a wrench until the
lock washer is fully compressed between the
KHDGRIWKHEROWDQGWKHÁDWZDVKHU
Correct Assembly:
Bolt has been screwed securely into weld nut
and the connection is tight. Check connec-
tions periodically for tightness during the life
of the Playset .
Do not over tighten.
Incorrect Assembly:
During assembly or maintenance the bolt pro-
trudes 1/8" past the weld nut. Call customer
service or replace the bolt at a local hardware
store. You may be overtightening or using the
wrong size bolt.
Failure to replace this bolt with a shorter
one could result in serious injury.
Typical Installation - Lag Screws:
3LORWGULOOZLWKWKHDSSURSULDWH
diameter drill bit and then use
a socket to tighten.
'2127RYHUWLJKWHQ
Typical Installation - Wood Screws:
8VHDQHOHFWULFGULOORUVFUHZJXQWRGULYHVFUHZV
'ULOOSLORWKROHVZKHUHUHTXLUHG
:HUHFRPPHQGWKDW\RXOXEULFDWHWKH
threads of the screws with beeswax or
soap to ease installation and minimize
breaking screws.
It is very important to make certain
WKDWWKHWRSVRIDOOVFUHZVDUHÁXVK
with the surface of the wood and
there are no protruding sharp
edg-
es.
