Page 18
Creative XP
3G Scouting Trail Camera PRO3
Introduction >
Power Supply
3.4
3.4 SD Card Selection
Using a memory card is required to operate the camera. When the
camera is “ON”, and no memory card is used, the screen displays “
Pls
insert memory card
”. The SD slot of the camera has a 32 GB memory
capacity. Before inserting or removing the memory card, the camera
must be turned “
OFF
”. Failing to do so may cause loss of or damage the
pictures already recorded from the memory card. When the SD card is
full, the viewing screen indicates “
Memory Full
”. The following data
shows an approximate quantity of photos that can be recorded by the
camera depending on the memory card capacity.
The chart below will show you the approximate capacity of different
size SD cards. Please check to see which size card can fit your needs
best.
To offer you a better user experience, our engineers designed this
camera to be able to work with most standard 12V/2A lithium battery
built-in solar panels. However, as rechargeable AA NiMH batteries need
higher voltage for charging, that solar panel can’t charge the batteries
while using them in the camera battery cases.
This camera can also be powered by an external 12V/ 2A DC adapter.
We recommend removing the AA size batteries when the power
adapter is used. Electrical power is recommended for security purposes.
Solar Panel
Power Adaptor—Security Surveillance Purpose