Make sure you select the sampling rate of the PCM SPDIF output of your Digital I/O jack to match the
requirements of the receiving device. You may need to select a lower digital output sampling rate. The
choices available are 44.1 kHz, 48 kHz and 96 kHz.
To solve this problem:
1. Go to
Start
Programs
Creative
Sound Blaster Audigy 5
Sound Blaster Audigy 5
Control Panel
, and click the
Speakers & SPDIF I/O
tab.
2. Select the required sampling rate from the
Digital Output Sampling Rate
list.
Popping noises are heard during playback.
The DMA feature may not be enabled for your computer's drives.
To solve this problem:
1. Go to
Start
Settings
Control Panel
, and double-click the
System
icon.
2. On the
System Properties
dialog box, click the
Hardware
tab.
3. Click the
Device Manager
button.
4. Double-click the
ATA/ATAPI IDE Controllers
icon.
Your IDE channels will appear.
5. Right-click the
Primary IDE Channel
icon.
6. Click
Properties
.
7. On the
Properties
dialog box, click the
Advanced Settings
tab.
8. Click the
DMA if available
checkbox.
9. Click the
OK
button.
Troubleshooting and FAQs 53
Summary of Contents for audigy 5
Page 1: ...1 ...
Page 27: ...12 Subwoofer 13 Ground 14 Side Left Connectivity 27 ...
