Troubleshooting C-4
❑
The Speaker selection in the Main panel of Surround Mixer corresponds to your
speaker or headphone configuration.
❑
The
Original Sound
sliders in either or both the
Master
and
Source
tabbed
pages of the
EAX Control Panel
application are set to 100%.
No audio output when playing audio CDs or DOS games that require a CD-ROM.
To solve this problem:
Make sure the Analog Audio connector on the CD-ROM drive and the CD In connector
on the audio card are connected.
Panning a source sometimes turns off its sound.
This occurs when you are in the Digital Output Only mode and the source’s left-right
balance in a software mixer application other than Surround Mixer (for example, the
Windows Volume Control application) is at the opposite end compared to the
position to which you have panned the source in the Main panel of Surround Mixer.
For example, the CD Audio balance in Windows Volume Control is on the left but in
Surround Mixer you have panned the CD Audio to the right.
To solve this problem:
Open that other mixer, and center the balances for all the audio input sources.
This ensures that your analog sources will not turn silent when you pan them in
Surround Mixer.
